How to maintain the bearings of the Industrial wood chippers and shredders properly
The Industrial wood chippers and shredders is the main product of our company. The Industrial wood chippers and shredders is a multi-purpose wood processing equipment. This machine is mainly used for cutting and processing logs. Tell the rotating impeller to be fixed, and the impeller needs to rotate normally. However, in the long-term use of wood chip processing, the bearing will inevitably experience abnormal wear and other situations. In this case, we have prepared the following methods for you:
Industrial wood chippers and shredders Industrial wood chippers and shredders Bearing Fault Remedy Method
1. The support of the impeller of the Industrial wood chippers and shredders requires two main shafts.
2. If the bearing seat of the Industrial wood chippers and shredders is uneven, or the rotor of the motor is not concentric with the rotor of the crusher, the bearing will be impacted by additional load, which will cause the bearing to overheat. If it is found that the bearing of the Industrial wood chippers and shredders is overheated, it should be stopped immediately to check the fault to avoid early damage to the bearing.
Industrial wood chippers and shredders
2. For the maintenance of the bearing of the Industrial wood chippers and shredders, we often add some butter, but the butter in the bearing is not easy to be too much or too little. In both cases, the main cause of bearing overheating and damage is prone to occur. Therefore, it should be used according to the use The book requires regular and quantitative filling of lubricating oil. Generally, lubrication accounts for 70%-80% of the bearing space. Leave some space between the bearings, which is more beneficial to the lubrication and heat transfer of the bearings, thereby prolonging the life of the bearings.
3. The installation of the bearing cover of the Industrial wood chippers and shredders should not be too tight. If the bearing cover is too tight, it will increase friction and accelerate the overheating of the bearing, and if it is too loose, it will easily leak lubricating oil. During the operation of the equipment, there will be friction sounds and obvious swings. Stop the machine and remove the bearings. Trim friction areas and reassemble as required.
The diameter of the wood determines the model selection of the Industrial wood chippers and shredders
Industrial wood chippers and shredders equipment is an important equipment in wood processing machinery, and it is called differently in different places. The Industrial wood chippers and shredders produced by Kowloon is composed of machine base, cutter head, transmission spindle, feeding port, cover, electric control system and other parts. It can be said that it is simple but not simple, and the mechanism is stable, firm and practical.
Industrial wood chippers and shredders
After the tree is transported back to the factory building from the mountain, it is processed from the wood peeling machine to the Industrial wood chippers and shredders, and the raw wood is put into the groove type peeling machine by using large mechanical equipment, and the peeling machine uses the force generated by the rotor with peeling teeth , so that the wood section circulates repeatedly in the trough of the silo, and also rotates around the axis of the wood section itself for crushing and irregular beating. So far, the wood section and the teeth, the wood section and the wood section, and the wood section and the bin are constantly rubbing, hitting, and squeezing, and the bark is quickly separated.
Industrial wood chippers and shredders If there is a trip problem during the working process of the Industrial wood chippers and shredders, don’t panic, first stop the power supply to check the detailed cause of the problem, and deal with it in a targeted manner.
Sustainable development is a policy development that our country has been calling for in response, and Industrial wood chippers and shredders equipment has also developed along with the trend. The Industrial wood chippers and shredders has a wide range of uses, and can cut logs, small-diameter wood and branch wood with a diameter of less than 200mm, and can process pine, miscellaneous, poplar, fir, and raw bamboo; the Industrial wood chippers and shredders has a compact structure, a small footprint, and wood chipping Good quality, low power consumption, and suitable for mobile operations; the Industrial wood chippers and shredders equipment is widely used in the material preparation section of small and medium-sized particleboard and fiberboard manufacturers, and can also be used by self-employed individuals to produce commercial wood chips.
The Industrial wood chippers and shredders equipment produced by the Industrial wood chippers and shredders manufacturer has a good development form under the national policy. As a developing country, my country’s policy policy is to develop in a sustainable direction, realize resource recycling, increase utilization value, and reduce resource waste , is of great significance to the economic development of our country.
Development of modern agricultural equipment for large corn stalk shredders
Corn is one of the high-yield food crops. After harvesting corn, many people cook directly from the stalks. In fact, it’s pretty wasteful because there are still many uses for corn stover, but unfortunately, not many people know about it. come and see
Corn stalks can be used as excellent feed for cattle, sheep and other livestock after being crushed, and can also be crushed into grass powder and processed into poultry feed such as chickens and ducks.
Large-scale corn straw shredders Kowloon machinery large-scale corn straw shredders equipment pays attention to innovation-driven development, firmly grasps the innovation bull nose, strengthens the construction of innovation system and innovation capacity, promotes the deep integration of technological innovation and quality improvement, and forms a pioneer that relies more on innovation-driven and exerts more Advantage development.
The invention is mainly composed of knife sets, each blade is carefully designed and manufactured, the material is practical and compressive, the double-edged cutter head can be used repeatedly, the service life is long, and the production efficiency is reduced. Cut off and crush. The harvested corn stalks are pulverized by a pulverizer and put into bags to cultivate bacteria, such as Coprinus comatus, mushrooms, oyster mushrooms, etc. Fertilizers that grow bacteria can also be used as farmyard manure.
Large Corn Stalk shredders
Crushed corn stalks can also replace wood to make high-density straw boards, which can be used in construction and decoration industries, saving a lot of forestry resources and reducing the pressure on wood demand. Straw papermaking can replace wood pulp papermaking. The clean pulping technology in straw pulp papermaking will make the paper industry more energy-saving and environmentally friendly in the next few years. The corn straw crushing equipment produced by Kowloon Machinery can greatly increase the value of straw.
The birth of the large-scale corn straw shredders Kowloon machinery corn straw shredders has given full play to the role of agricultural modernization, realized environmental protection and energy saving, saved resources, recycled new renewable resources, and set an example for the city’s agriculture. The machine is well-equipped with complete functions, reasonable price and high quality. The warranty period of the equipment is one year, and users can buy with confidence.
Application of corn stalk shredders in feed processing industry
Kowloon Machinery’s excellent corn straw shredders price determines quality, quality determines safety, safety determines production, production determines power, power determines profit, and profit determines the future. Only by purchasing the appropriate pulverizer equipment can the products required by customers be produced.
Professional large-scale feeding livestock products for farms – corn stalk shredders. The large-scale corn stalk shredders equipment manufactured by Kowloon Machinery can not only supply power plants, but also be used in farms. Good effect, high output value.
corn stalk shredders
After the feed is fed into the corn stalk shredders, the feed will flow along the tangential direction of the rotor to the crushing chamber. There are rapidly rotating hammers in the crushing chamber. The crushed feed is thrown towards the tooth plate, then bounced back by the tooth plate and then crushed again by the hammer. It is relying on such repeated impact and crushing to break the large particle of feed into fine particles. After being destroyed, the small particles leak out from the sieve holes, while the large particles are left on the sieve surface and are repeatedly hit until they reach the required size and leak out of the sieve surface.
corn stalk shredders
Corn stalk shredders is an advanced fine crushing equipment. This series of products is carefully developed on the basis of absorbing the advantages of various equipment and fully absorbing experience. When the corn straw shredders equipment is in operation, the material can be fully and quickly crushed in the crushing chamber, with high output, low energy consumption, high power, and evenly crushed output. And when using the equipment, it has low noise, no pollution, simple operation and convenient maintenance. Corn straw shredders products are all made of high-quality steel and national standard materials, so users can use them with confidence. This is also the original intention of Kowloon Machinery to conquer the market with quality and win customers with reputation.
Straw shredders
Kowloon Machinery Corn Stalk shredders has a reasonable structure, solid and practical, safe and reliable, simple installation, convenient operation, low noise, and is suitable for various feed mills alone or supporting use. It is the processing equipment with the best sales volume in China at present.
