Garbage shredder chooses Kowloon to save money and save energy
Now masks have become a necessity for daily travel and work. At the same time, everyone often wonders, how do I dispose of my used masks after throwing them away, and will there be secondary pollution? Then, a series of similar problems will come to mind, such as how to dispose of protective clothing, needles, infusion tubes, etc.
Generally speaking, each city-level region has a special unit for the disposal of medical waste. Special personnel and vehicles collect the medical waste from the warehouse where the medical waste is permanently stored in the hospital, and sterilize and reduce the amount by incineration or high-temperature cooking. .
Many people don’t know much about medical waste, such as masks or protective clothing, needles, disposable infusion tubes, etc., in theory, the normal situation is basically generated in the hospital, so they are unified They all belong to medical waste. Definition of medical waste: Medical waste refers to directly or indirectly infectious, toxic and other hazardous waste produced by medical and health institutions in medical treatment, prevention, health care and other related activities. Medical waste pollutes the environment, spreads diseases, and threatens health, which is very harmful. These medical wastes mainly include: 1. Infectious wastes, 2. Pathological wastes, 3. Injurious wastes, 4. Pharmaceutical wastes, 5. Chemical wastes.
So what are the ways to dispose of medical waste? At present, the treatment methods of medical waste include high-temperature incineration, sanitary landfill, pressure steam sterilization, chemical disinfection, dry heat crushing sterilization, electromagnetic wave sterilization, high-temperature pyrolysis sterilization, etc., but Crushing is performed prior to processing.
According to the medical waste disposal technical route determined in the “National Hazardous Waste and Medical Waste Disposal Facilities Construction Plan” and the fact that most of the medical waste disposal facilities in cities at various levels in my country are of medium and small construction scales, domestic medical waste disposal is currently used more The most widely used are pyrolysis incineration technology and high temperature steam treatment technology. According to statistics, incineration, high temperature steam treatment and chemical disinfection treatment technologies accounted for 48%, 47% and 5% respectively.
It is not difficult to find that the processing and recycling of medical waste and domestic waste all need to go through the crushing process, which requires the use of shredders for crushing. Kowloon Machinery has special equipment for crushing medical waste-medical waste shredder.
Medical waste shredder
The medical waste shredder chooses Kowloon to save money and save energy. Kowloon Machinery has professional medical waste crushing experience, which can effectively crush all kinds of medical waste. Kowloon Machinery shredder has good sealing and corrosion resistance; the knife is made of alloy material to ensure good wear resistance and high impact strength, which can meet The shredding requirements of medical waste with complex material components can be shredded for metal products such as stainless steel instruments and prostheses. Kowloon Machinery provides different equipment structures according to different medical waste shredding requirements. It is equipped with bucket elevators, belt conveyors, and screw conveyors independently developed by Kowloon Machinery, which effectively improves the processing efficiency of medical waste shredders. The crushed materials come out The material particle size meets the industry standard.
Bulky waste disposal solutions create value with strength
As environmental protection equipment enters the field of vision of human beings, more and more people understand the role of shredder equipment such as shredders and shredders, and have a new and profound understanding of the garbage generated by our various industries, such as domestic garbage, Industrial waste, medical waste, waste metal, waste tires, waste plastics, waste cartons, waste wood, etc. There are also classifications of domestic waste, such as bulky waste (waste furniture, waste home appliances, decoration waste, etc.), kitchen waste, electronic waste, etc. Among them, bulky waste refers to waste that weighs more than 5 kilograms, or has a volume greater than 0.2 cubic meters, or is more than 1 meter in length. It is strong in integrity and needs to be disassembled for reuse or disposal, including waste household appliances and furniture that we often say , Decoration waste, etc.
Bulky Waste Disposal Solution
According to the characteristics of these bulky wastes, Kowloon Machinery bulky waste shredders provide you with a complete bulky waste disposal solution. The bulky domestic waste production line is developed for the characteristics of bulky waste and combined with mechanical, electrical, hydraulic, and intelligent technologies. The designed shredder equipment is mainly composed of heavy-duty chain conveyor, double-shaft shear shredder, iron remover, dust suppression system, intelligent control system, etc. The chain plate conveyor transports the bulky garbage to the shredder, and the shredder breaks the material into smaller materials, iron wires, iron sheets and other metal materials are sorted out by iron removal, and other materials are conveyed through the belt conveyor for induction or directly into the On the garbage removal vehicle, the entire production line is equipped with a professional dust suppression system to realize rapid transfer of garbage, effective capacity reduction, and reasonable classification and treatment.
Bulky Waste Disposal Solution
Kowloon Machinery’s large-scale waste treatment plan creates value with strength. Through the large-scale waste crushing and treatment system, crushing and capacity reduction, sorting, crushing and volume reduction, sorting of ferrous metals, sorting of non-ferrous metals, wood, sponges, etc., so as to output High-quality metal, sponge, activated carbon, textile, wood, plastic and other resource materials, new building materials wood-plastic products made of sawdust and plastic, wood-plastic products are widely used in outdoor municipal facilities, with high structural strength and corrosion resistance , Wood is decomposed into high-quality activated carbon through carbonization, from garbage to value-added products. Activated carbon can be widely used in various industrial fields such as automobiles, medical care, chemicals, and environmental protection.
Factors to consider when choosing a solid waste shredder
The solid waste shredder is what we usually call a solid waste shredder. It is very important to choose a suitable solid waste shredder, because a good choice can solve many problems for customers. If the choice is not good, it will not only waste time, but also lose money. However, how much do you know about the places to consider when choosing a solid waste shredder? Facing the various types of shredders on the market, people are dazzled and confused. How to choose a solid waste shredder? Next, Kowloon Machinery will draw the key points for you and talk about the key points:
Solid waste shredder 1. What size solid waste shredder to choose?
As for how to choose a shredder with a suitable specification, Kowloon Machinery usually recommends a suitable shredder according to the material characteristics and output size requirements. The specification of the shredder is usually not required to use all the available power to complete the crushing work. Because the knives will become blunt over time, and more energy will be required to chop the material. If the shredder has sufficient spare power, the user can continue to use it longer without maintenance before the knives need to be replaced. Kowloon Machinery also suggests that as long as the power is sufficient, the size of the knife box should be considered when choosing a shredder, and as much material as possible should be grabbed. Therefore, in addition to model and power, factors such as hook size and wheelbase, feed chamber and material properties need to be considered, which are all important factors to consider.
Solid waste shredder 2. What kind of feeding method to choose?
Bulk feeding refers to the grab bucket pouring large quantities of material into the shredder hopper. While bulk feeding is straightforward, it is often common in handling household waste, hazardous waste or bale material handling. However, if the size of the cutter box of the shredder is not suitable, the shredder is more likely to cause material bridge blockage or accept more material than the crushing capacity at a time in the case of batch feeding.
Therefore, metered feed is very important. Metered feeding refers to the feeding of material into a hopper at a steady, controlled flow by a conveyor. It is common to deal with bulky waste, paper mill light slag or fruits and vegetables, and kitchen waste. If the material can be metered and fed, the shredder can more effectively regulate the speed of the conveyed material by monitoring its feed volume. Metering feed can make the number of reversals or shutdowns less, thereby improving production efficiency and increasing output value, which is also very critical.
Development Situation of Waste Resource Recycling Industry
The Internet information age has a great impact on our lives, and online messages also reflect some topics that have attracted much attention in some industries, such as the issue of environmental governance that was hotly discussed some time ago-garbage classification and no littering. There are a lot of garbage that can be seen everywhere in life. Many people never pay attention to the function of sorting trash cans. They think that as long as they throw garbage into the trash can, they are making a contribution to environmental protection. Many people have never paid attention to the impact of environmental issues and resource issues on our production and life, but there are also some groups who pay great attention to this. Let’s analyze the development situation of the waste resource recycling industry in 2020. Let’s analyze it fundamentally.
Shredder
According to the current situation, household waste is divided into four categories: hazardous waste, recyclable waste, wet waste and dry waste. Among them, recyclable garbage is garbage suitable for recycling and resource utilization, and is one of the important sources of resource reuse. If we can classify and discard garbage in the corresponding trash cans in our daily life, it can reduce the workload of garbage sorting, improve the recycling rate of domestic garbage, and truly contribute to the cause of environmental protection. In the resource recovery mode, the polydisperse recovery mode is relatively common. After being developed, utilized and discarded in human production, life, scientific education, transportation, defense and other activities, the material resources that can be recycled repeatedly are produced with minerals as raw materials. Iron and steel, non-ferrous metals, alloys, inorganic non-metals, plastics, rubber, fibers, paper, etc. are called recycled resources.
Shredder
With the gradual opening of the resource market, my country has screened and classified fixed acquisition points, mobile acquisition points, finders, resource processing enterprises, etc. from the sources of occurrence, forming a complete process of utilizing enterprises. The industrial chain of the reusable resource industry mainly includes three links: waste resource recovery, resource treatment and resource reuse. From the perspective of resource recycling models, my country mainly includes five categories: decentralized recycling model, hierarchical recycling model, point-to-point recycling model, soft management model and contracting agreement model. Among them, the distributed recycling model consists of a large number of distributed recyclers, small one-time dismantlers, production seminars and some waste dispersal. Distributed recyclers collect waste, dismantle it according to one classification, and the model of decentralized sales of waste is more common.
Shredder manufacturer
The current development situation of the environmental protection market is very good. Many people want to start investing in shredder equipment. The reason is nothing more than the attraction of huge economic profits. But the idea is good, but the reality is cruel. How to say, from the current market, there are too many manufacturers producing shredders. If you want to choose a shredder, it is not an exaggeration to say that it is one in a hundred. There are many When customers see us, they will say: I didn’t expect that there are so many shredder manufacturers now, which makes people dazzled and I don’t know how to choose.
How to choose a good shredder manufacturer is an important issue. Kowloon shredder manufacturers have made a detailed analysis on this for your reference. Taking metal shredders as an example, what we know is that for a manufacturer that mainly produces plastic waste shredders, it must first have advanced technology, strong strength and good after-sales service. Such a manufacturer It has a good reputation in the industry. In addition, the requirements for equipment quality must be very strict. Every machine that leaves the factory must have strict to almost harsh inspection procedures to prevent any problems when customers use it. Shredder equipment is constantly improving with the development of the market to meet the different needs of different users, and the equipment is also constantly improving and upgrading. In the production of equipment, there is a complete one-stop service from production to delivery, and even after-sales, so that the quality and performance of the equipment produced by these manufacturers can be guaranteed, as well as the service life of the equipment.
Shredder
Shredder equipment can be divided into metal shredders, plastic waste shredders, biomass fuel shredders, etc. Plastic shredders are widely used in the shredding industry, and the materials that can be shredded include: plastics, paint buckets, straw straw, domestic garbage, scrap iron, scrap steel and other materials. However, some customers reported that the output of the plastic shredder will drop when processing large pieces of material, what is going on? First of all, the feed speed must be considered. The feed speed of the plastic shredder is an important link in the work, so it is necessary to ensure that the feed speed of the plastic shredder is uniform, and the reducer feeder can be configured for easy operation. For details, please call Kowloon Machinery, we will make a detailed plastic waste production line plan for you, for your reference and selection.
The shredder shredder shreds materials of different sizes. When crushing bulk materials, the size of the feed port must be solved first, and the caliber of the plastic shredder should be changed, so as to achieve a good crushing effect on bulk materials. The large-diameter plastic pulverizer has a large motor horsepower and a high rotor speed, so we only need to set the discharge degree to control the size, so that the qualified materials will flow out along the double mesh screen, and the unqualified materials will work in the machine cavity. until qualified.
The purity of the processed material should be guaranteed.
Shredder
Check the plastic shredder regularly to check whether the host of the plastic shredder is balanced. Check whether the installation position of each component is moved or deformed, tighten all bolts, and check whether the seal is intact. Check the hydraulic system for reliability and leaks.
